Do you know what brand of camera you have now? I would need to know that for sure to pick out the correct camera replacement. I believe you have an RVS brand system now on your 2017 Coachman Mirada 35LS so for a replacement for that you could use the part # RVS-812N. view full answer...
For your 2000 Coachmen Mirada built on an F-53 chassis the correct Roadmaster Steering Stabilizer is the part # RM-RBK22-RSSA. I attached an install video for this on a similar Mirada as yours for you to check out as well. view full answer...
I have some great replacement RV door latch options. The only one we offer that would come close to fitting such a large cutout is the Bauer Products Camper Door Lock part # BA65FR which fits up to 5-1/4" wide x 4-1/2" tall openings so slight modifications would be needed to be made compatible. It is our best option at this time for replacement. view full answer...
Your 2011 Coachmen Mirada has what they call a double din fit. I recommend the Jensen RV Stereo - Double DIN - AUX/USB, Bluetooth, jControl - 12V # JWM60A. The overall dimensions are 10-7/16" wide x 7" tall x 6-1/2" deep with mounting dimensions of 9" wide x 6" tall x 5-1/2" deep.
If that is too large for your cab I've attached the link to all our double din options as well as a link our in-cab options. Each option will have the dimensions to help you confirm your desired fit on the... view full answer...
For SumoSprings, or any other option, I recommend starting with the rear first. This will make the biggest impact. For your 2019 Coachmen Mirada 350S you will need the # SSR-180-54-1.
SumoSprings are always a great choice for suspension enhancement. These will help combat sway while also absorbing bumps and shocks to smooth out your ride. Adding the front # SSF-170-40-2 as well is definitely a good idea for a motorhome.
If sway alone is your main concern, the only thing that would be... view full answer...
I looked up your 2015 Coachmen Mirada that's built on a Ford F-53 chassis and it's a 34BH model which means the correct front SumoSprings kit is the part # SSF-170-40-2. The correct rear kit then is the part # SSR-180-54-1. view full answer...
Yes, the Adco # 290-3951 tires covers would be perfect for snow, ice, and extreme cold in Iowa. Your Miranda was originally equipped with 245/70-R19.5 tires which works out to 33" diameter, so you have selected the correct size unless you have drastically changed tire sizes. Don't forget that these come in a 2-pack and you need 4.
I have attached a video review of this product for you. view full answer...
I do have an option for you but there aren't any upgraded bolt-on trailer hitch options for a 2013 Coachmen Mirada Motorhome. If you wish to replace the hitch that is installed currently, you'll have to use a universal one such as the Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver part # 41990-07. That said, the installation of this hitch requires welding or drilling and bolting. view full answer...
I looked up the GVWR of your 2005 Keystone Outback Sydney Edition 29 FBHS and found that it would be right at around 10k so for springs you'd want the # e28SR which is 25-1/4 inches long and has a 5,000 lb per axle capacity. view full answer...
The Roadmaster front anti-sway bar is an excellent option for added stability for your customer's motorhome, and you were correct about the fit for a 2007 Coachmen Mirada with a 20,500 lb GVWR, which is the following:
- Roadmaster Front Anti-Sway Bar # RM-1139-148
This stabilizer is going to do a superb job of helping brace the axle on the motorhome, resulting in more controlled handling and making it easier to steer your Coachmen. In regards to installation, it should take somewhere... view full answer...
Since the Carrier AirV AC unit is a low profile RV AC unit the cover you'd want is the Adco RV Air Conditioner Cover for Carrier Low Profile # 290-3025. This will fit well and provide great protection for your AC when the RV is being stored. view full answer...
I recommend a Draw-Tite Ultra Frame Service Body Trailer Hitch Receiver # 41990-07. This universal receiver will need to be welded on to fit your Coachmen Mirada and is designed to fit frames up to 44" wide. This Class V receiver is rated for up to 16,000lbs of trailer weight and 1,600lbs of tongue weight. Be sure to not exceed the trailer capacities given by Ford for your specific chassis.
The Curt Trailer Hitch Receiver # C15445 is not confirmed to be a fit for your 2001 Ford F-53 chassis... view full answer...
The Bauer Camper Door Lock part # BA54FR that you referenced was designed to fit the standard RV doors so it most likely would work well as long as what you have now resembles it and has similar dimensions which this is 3-11/16" wide x 4-1/2" tall and fits door cut outs of 2-3/4" wide x 3-3/4" tall. If you have something different let me know and I'll see what you'd need. view full answer...
Go To Results